Wood & Clad TILT PAC Double Hung D/H S/H JAMB LINER Assembly

MARVIN Wood and Clad TILT PAC Double Hung D/H & Single Hung S/H JAMB Hardware Assemblies. ORDERING REPLACEMENT JAMB HARDWARE FOR E−ZTILT DH/SH TILT PAC (ALSO USED ON DOUBLE HUNG UNITS MANUFACTURED BEFORE APRIL OF 1986.) 

Replacement jamb hardware assemblies complete include a pair of clip mount vinyl jamb liners, jamb liner foam, foam plugs, foam gaskets, pile weather strip, adhesive backed foam block, sash stops, installation clips, S−hooks and balance tubes. NOTE: Jamb liners must be ordered in pairs.

1. Provide any original order numbers if available? 

2. Specify type of Tilt Pac, (Double Hung or Single Hung).

3. Specify clip mount.

4. Specify color of liner (beige or white).

5. Provide "A" Length and "B" Length of the Jamb Liner 

6. Provide balance ID CODE STAMPING - imprinted on the tube, (see illustration).

7. Specify Code for TOP BALANCE and BOTTOM BALANCE?

8. Specify Color Code of CLUTCH

9. Specify the PROFILE of the Jamb Liner (see Picture) - FLANGE or BRACKET Type?